Ravaglioli RAVTD1760 WS Instruction Manual page 33

RAVAGLIOLI S.p.A.
Move vehicle forward, very slowly, until reference sensor reaches again almost the start
position. When finished, press central key to confirm.
Vehicle thrust
direction
(forward)
Position reference sensor horizontally - clearly levelled - and, when finished, press central
key to confirm.
"STOP" is displayed for approx. three seconds, which is enough for the programme to acquire
measurement readings.
The thrust Run-Out procedure with "inclinometer control" has been carried out.
Should you be willing to repeat the operation once the programme has already entered a
following phase, you can go back to this page by pressing F1, and repeat the above
procedure. Once the Run-Out procedure has been completed, programme will automatically
go to the next phase.
RAVTD1760 WS – RAVTD1780 WS
Figure 42
Figure 43
RAVAGLIOLI S.p.A. - Via I° Maggio, n° 3 (Pontecchio Marconi)
40037 Sasso Marconi (Bologna - Italy)
Tel. 051/ 67.81.511 – Fax 051/ 84.64.67 E-mail: rav@ravaglioli.com
Instruction manual
Code M0197 - rev.1.0
(11/2010)
Reference
sensor reaches
the position
almost as
"start"
Reference
sensor
horizontal
position
Page 31/52