Advertisement
If the red setting lines are not aligned, turn the cable
adjusting bolt of the Rapidfire lever to align the setting
lines. After this, move the Rapidfire lever once more from
4
to
1
and then back to
that the red setting lines are aligned.
Cable adjusting bolt
2.
After adjusting the cassette joint, cut off the excess length of
inner cable and then install the inner end cap.
Inner end cap
15 – 20 mm
These service instructions explain how to use and maintain the Shimano
bicycle parts which have been used on your new bicycle. For any
questions regarding your bicycle or other matters which are not related
to Shimano parts‚ please contact the place of purchase or the bicycle
manufacturer.
Please note: Specifications are subject to change for improvement without notice. (English)
One Holland Irvine CA 92618 U.S.A. Phone 9 49- 951-50 03
Industrieweg 24 NL-807 1 CT Nunspeet‚ Holland Phone 3 1-3412-72222
3- 77 Oimatsucho‚ Sakai‚ Osaka‚ Japan Phone 0722- 23-3243
C
Jun. 1998 by Shimano Inc. PIT. SZK. Printed in Japan
4
, and then re-check to be sure
These service instructions are
printed on recycled paper and
can be recycled again.
t
Advertisement
