Table of Contents
Advertisement
10.3
GENERAL INSTALLATION
• Please check that the floor has an adequate load capacity. If the existing one does not satisfy this requirement,
appropriate measure should be provided (for example a plate for distributing the load).
• It is obligatory to install the stove away from walls and/or pieces of furniture, with a minimum air flow of 300
mm on the sides and 300 mm on the back, to enable an eficient appliance cooling and a good distribution
of heat in the room (see Fig. 13 page 15).
• For safety fire regulations the distances from flammable or sensible to heat objects (sofas, pieces of furniture,
wooden covering, etc...) must be respected, has described in Fig. 13 page 15.
• If there are highly flammable objects (curtains, fitted carpet, etc...), all these distances must be further
increased with 1 meter.
• If the walls are made up of flammable materials, check the safety distances (see Fig. 13 page 15).
• At maximum power check that the wall temperature does not ever exceed 80°C. If it would be necessary
please install a fire resistant plate on the concerned walls.
• In some countries also masonring load-bearing walls are considered flammable.
10.4
ELECTRIC CONNECTION
Some wood stove models are endowed with a forced ventilation system, so they need an electric connection.
Warning: the appliance must be installed by an authorized technician!
• The electric connection occurs through a cable with plug put in an electric socket which is able to support
charge and tension specific of every model, as described in the technical datas table (see FEATURES page
22).
• The plug must be easily accessible when the appliance is installed.
The cable must not get in touch with the fume exhaust pipe and nor with every other part
of the stove.
CARINA - DORA
Fig. 12 - General installation
LEGEND
Fig. 13 page 15
1
Stove
2
Minimum lateral distance = 300 mm
3
Minimum rear distance = 300 mm
4
Minimum front distance = 1000 mm
EN
15
Advertisement
Table of Contents
