Danfoss ERC 214 Installation Manual page 7
Digital controller for refrigeration and defrost, 4 relays
Hide thumbs
Also See for ERC 214:
- Installation manual (9 pages) ,
- User manual (36 pages) ,
- User manual (36 pages)
Table of Contents
Advertisement
Available languages
Available languages
Quick Configuration at Power Up
y
STEP 4: Select sensor type "o06"
The display automatically shows sensor selection parameter "o06".
Press SET to select the sensor type.
The display shows the default value (eg. "n10" flashing).
Choose sensor type by pressing UP/DOWN (n5=NTC 5 K, n10=NTC 10 K, Ptc=PTC, Pt1=Pt1000) and press SET to
confirm.
NOTE: All sensors must be the same type.
y
STEP 5: Configure DO4 output "o36"
The display automatically shows the "o36" parameter to configure "DO4" output.
Select light ("Lig") or alarm ("ALA") as per the application and press SET to confirm.
The display returns to normal display mode and the control is started.
DKRCE.PI.RL0.H7.ML
Installation Guide | ERC 214
| 7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ERC 214 and is the answer not in the manual?
Questions and answers