The Information Contained In This Document Is Subject To Change Without Notice; Safety Instructions; Ce Declaration; Fcc Declaration - Magicard Ultima User Manual

THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE
Magicard Ltd. shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing,
performance or use of this material.
This document contains proprietary information belonging to Magicard Ltd. and may not be wholly or partially copied, stored in a data
retrieval system, or used for any purpose other than that for which it was supplied, without the express written authority of Magicard
Ltd. All rights are reserved.
The HoloKote feature is protected by US PATENT No: 5,990,918 and by EUROPEAN PATENT SPECIFICATION EP 0 817 726 B1.
Microsoft and Windows 2000, XP, Vista and Windows 7 and 8 are trademarks of Microsoft Corporation.
Copyright © 2011 Magicard Electronics Limited.

SAFETY INSTRUCTIONS:

To prevent electric shock do not remove covers.
Do not attempt to service the printer yourself.
There are no user serviceable parts inside. In the event of malfunction, refer servicing to your printer's supplier.
This product is only to be used with the Power Source supplied at point of purchase.
Take care not to spill any liquid on the printer.
Ensure that the power supply cord is no longer than 2 metres in length and includes a properly grounded connection.
If using this printer in Germany:
To provide adequate short-circuit protection and over-current protection for this printer, the building installation must be protected by a
16 Amp circuit breaker.
Bei Anschluß des Druckers an die Stromversorgung muß sichergestellt werden, daß die Gebäudeinstallation mit einem 16 A-
Überstromschalter abgesichert ist.
When handling the printer avoid touching the thermal printing edge of the thermal print head. Any grease and contamination will
shorten its life.
Before transporting the printer, remove the dye film & card hoppers and pack the printer in its original packaging.

CE DECLARATION:

FCC DECLARATION:

Information to the user.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.

CCC DECLARATION:

CAUTION:

Unapproved changes or modifications could void the Users authority to operate the equipment and affect any related
warranty claim.
ReTransfer ID Card Printer – User Manual
WITHOUT NOTICE
4