Reverse Button; Reverse Button; Brp Connect Button; Brp Connect Button - Can-Am Spyder RT 2018 Operator's Manual

219001827-007_a
RECC AND PARKING BRAKE BUTTONS
1. MODE button: activates or deactivates
ECO mode
2. PARKING BRAKE button: activates or
deactivates the PARKING BRAKE
3. JOYSTICK button: Used to
navigate through menus by
going up / down / left / right.
Quick press then release: Enter
function.
WARNING
Using the RECC while driving can
distract the driver from operating
the vehicle. Always use buttons
with caution and always keep your
eyes on the road.
Audio Control
To turn the radio ON, push the JOY-
STICK UP. To close the radio, push the
JOYSTICK DOWN when the volume is
at its lowest setting.
When in the home screen, pushing the
JOYSTICK UP or DOWN will increase
or decrease the audio volume.
NOTE: .
To enable the audio automatic volume
level control, go to:
– Audio
– Configuration
– Auto vol CTRL
Push the JOYSTICK DOWN and hold it
more than one second. The audio vol-
ume will mute.
From the mute setting, pushing the UP
button will reset the audio volume to its
last setting.

11) Reverse Button

The reverse button is located on top of
the left handlebar housing.
219001827-006_h
TYPICAL

1. Reverse button

Push and hold the reverse button to al-
low shifting into reverse. Refer to
ERATING IN REVERSE
CEDURES
The backup lights turn on when the ve-
hicle is in reverse.

12) BRP Connect Button

The BRP Connect button is located on
the left handlebar housing facing the
clutch lever.
219001827-008_a
1. PTT button
The BRP Connect button is used for
quick access to BRP Connect. Each
click will swap between apps view and
functions view of the multifunction
gauge.
_______________
SECONDARY CONTROLS
BASIC PRO-
in
for detailed instructions.
OP-
25