Can-Am Spyder RT 2018 Operator's Manual page 45

rmr2010-038-007_b
1. Left service cover
2. Plastic rivet
9. Remove front retaining screw from
top side panel.
rmr2010-038-008_a
1. Front retaining screw
10. Remove lower retaining screws of
top panel.
11. Remove top side panel by lifting it
upwards.
rmr2010-038-009_a
1. Top side panel
NOTE: There are two esthetic screws
on the top side panel which cannot be
removed.
Installation
Reinstall top side panel in the reverse
order of the removal.
Rear Side Panel
Removal
1. Remove side panel.
2. Remove top side panel.
3. Remove front retaining screw of
rear side panel.
4. Remove upper retaining screw and
washer from rear side panel.
rmr2010-038-010_a
1. Front retaining screw
2. Upper retaining screw
5. Remove front plastic rivet from rear
side panel.
rmr2010-038-011_a
1. Front plastic rivet
6. Open side storage compartment
cover.
7. Remove rear retaining screws from
rear side panel.
_______________
EQUIPMENT
41