Table of Contents
Advertisement
®
IntesisBox
KNX - Haier A.C. (VRF line)
3 Configuration and setup
This is a fully compatible KNX device which must be configured and setup using standard KNX
tool ETS.
ETS project for this device can be downloaded from:
https://www.intesisbox.com/en/haier-knx-ac-ha-ac-knx-8_16_64/gateway/
Please consult the README.txt file, located inside the downloaded zip file, to find instructions on
how to install the database.
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox is a registred trademark of Intesis Software SLU
User's manual r1.0 EN
URL
http://www.intesisbox.com
email
info@intesisbox.com
tel
+34 938047134
7 / 31
Advertisement
Table of Contents
Need help?
Do you have a question about the HA-AC-KNX-16 and is the answer not in the manual?