Advertisement
__________________________________________
GP-H80300IIN, GP
Firstly thank you for choosing our Wi-Fi thermal printer, please follow this manual to use your Wi-Fi
printer.
1. Turn on the printer, use your PC or laptop to search the
Wi-Fi printer and connect it.
Remark: Default mode of Wi-Fi printer is Access Point mode（SSID: Printer AP）; other devices could connect it
and use its Wi-Fi network.
2. Open IE browser and input
Then click STA Mode.
Remark: IP address in STA mode and AP mode could not be in same network segment.
For example, if your router network segment is same 192.168.0, then you're suggested to change printer
AP mode's IP network segment. Click AP Mode in above picture showing page and set printer IP
address to be 192.168.123.XXX or 192.168.100.XXX or others.
WiFi Setup Guide in Web Page
1124D and GP-1124T Wi-Fi Printer
-
Account: admin
Password: admin
192.168.0.1, log in.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GPRINTER GP-H80300IIN
Summary of Contents for GPRINTER GP-H80300IIN
- Page 1 WiFi Setup Guide in Web Page __________________________________________ GP-H80300IIN, GP 1124D and GP-1124T Wi-Fi Printer Firstly thank you for choosing our Wi-Fi thermal printer, please follow this manual to use your Wi-Fi printer. 1. Turn on the printer, use your PC or laptop to search the Wi-Fi printer and connect it.
- Page 2 3. Choose STA Interface Setting and set up as per below. 4. Click Device Management and click Restart, wait for your printer to take effect the new settings.
- Page 3 5. Print the Self test page, you will find the details of Wi-Fi printer IP address etc. Wi-Fi mode: STA If not showing STA, then please repeat the setup procedures and make sure you wait for enough time for printer to restart, and take effect the new settings, until you see STA showing on the page. Wi-Fi STA IP: DHCP, 192.168.123.170 You’ll find it is different network segment from printer IP in AP mode 192.168.0.1.
- Page 4 Input the IP showed on the selftest page...
- Page 5 Choose the port You just added 7. Take a windows test page in driver property; if test page is printed out, congrats, your Wi-Fi printer is connected successfully.
Need help?
Do you have a question about the GP-H80300IIN and is the answer not in the manual?
Questions and answers