Peecon Cargo Compact Series Operator's Manual page 47

NOTE! The safety support for types 13000 and 18000 differs from that for types 19000 and
21000. You can see the two different models here.
Fig. 5-2 Safety support for the
Compact 13000 and 18000
Fig. 5-4 On the Compact 13000 and 18000
First tip the hook system up and then place the safety
support on the box section. Secure this box section
using the enclosed securing device such that the box
section will stay at the right angle.
Maintenance and inspection
Fig. 5-5 On the Compact 19000 and 21000
First tip the hook system up and then place the safety
support in the chassis eye. Secure this box section
using the enclosed securing device such that the box
section will stay at the right angle.
Fig. 5-6 On the entire Com-
pact line.
Slowly lower the hook system
until it just touches the safety
support. Once the support has
been put firmly and stably in
place between the frames, you
can work between the frame,
but you should then observe due
caution!
Fig. 5-3 Safety support for
the Compact 19000 and 21000
47 47