Peecon Cargo Compact Series Operator's Manual page 36

Safety instructions
3.7.1 Explanation of the safety symbols used
1
Fig. 3-2 Note!
Read the operator's manual and the safety
instructions before commissioning the machine
and heed them at all times.
3
Fig. 3-4 Note!
Torque 310 Nm. Tighten the wheel nuts and
check the tyre pressure after the first machine
hour and then every 25 machine hours.
5
Fig. 3-6 WARNING!
Never stand or sit on the hook system while it
is moving. People who ride on the equipment
may get crushed between the system and the
tractor.
36 36
2
Fig. 3-3 WARNING!
Faulty hoses can cause physical injury and
environmental pollution. Only work on the
system if it has been depressurised.
4
Fig. 3-5 WARNING!
Never tip the hook system on a slope. The
hook system may topple over when tipping on
a slope
6
Fig. 3-7 Note!
Regularly check the lubrication points; this will
prevent wear and high costs. Use the grease
or lubricant specified. When in doubt, you can
always contact your dealer.