Peecon Cargo Compact Series Operator's Manual page 45

9. Then continue dropping off the container by further extending the large cylinder. If necessary, you can
now carry out steering corrections so that the vehicle will drive off in a diagonal direction.
10. Stop extending the cylinder early enough, i.e. when the container almost fully rests on the ground.
NOTE! If the extending of the large cylinder is not stopped in time, the rear of the system will
be raised. This might severely damage the hook system.
11. Carefully drive the vehicle forward, so that the container bracket is released from the hook. Here, you
may have to correct the hook height a bit by extending or retracting the small or large cylinders.
12. The container has now been placed; now drive the vehicle to a safe location.
13. Fully retract the large cylinder.
14. Retract the axle interlocking facility.
15. Switch off the PTO.
16. The vehicle is now ready to be moved.
NOTE! Never drive on public roads with a system that is in reclining position. This may be very
dangerous for any traffic behind you. Furthermore, unnecessary damage to the system may
occur and this is not allowed pursuant to the Dutch RDW's road safety requirements.
Make sure that, while pulling up or dropping off a container, the buckle cylinder has been
retracted completely when the front of the container is near the guide rollers (see the
illustration).
Fig. 4-6 Danger instructions
Function description
45 45