Peecon Cargo Compact Series Operator's Manual page 40

Function description
Fig. 4-2 approaching the container
9. Engage the axle blocking device. (See sections 1.6.12/1.6.13 for the controls.)
10. Start picking up the container by having the large cylinder retract while applying a sufficiently high
rpm (note the maximum rpm specified). "1,000 rpm"
11. Since the trailer should roll under the container during this procedure, you have to correct its course in
time so that the container's chassis beams will end up between the flanges of the guide rollers. You
are not allowed to buckle the tower - and continue placing the container on the chassis in a straight
movement - until the container has just passed the guide rollers.
Fig. 4-3 points for attention while picking up a container
TIP! The system may get damaged if the hand brake is applied duirng this phase.
12. Apply the tractor's handbrake when the rear end of container comes free from the ground.
DANGER! Do not raise the container any further if the tractor comes loose from the ground, as
you will no longer able to steer the vehicle then.
40 40
These instructions are continued on the next page!