Peecon Cargo Compact Series Operator's Manual page 19

1.6.9 Hook
This system is available in two different versions, i.e. the Compact 13000/18000 and the Compact 19000/
21000. This change-over system was designed to change over between the container put-on/put-off position
and tipping. The unit is always located in the centre, on the left-hand side of frames 2 and 3.
NOTE! Electrohydraulic operation features sensors for more user-friendly operation. These
sensors read the status of the change-over system. If any of these sensors breaks down (the
change-over system will no longer work then), you should clearly indicate which sensor has
broken down.
Manual or hydraulic adjustment
Sensor "Normal Open"
Tipping position
Pulling on/Dropping off
position
Tipping position
Fig. 1-19 Cargo Compact 13000/18000
Fig. 1-20 Cargo Compact 19000/21000
Introduction
Put-on/Put-off position
2x Sensor
Normal open
Change-over cylinder
"hydraulic"
19 19