Peecon Cargo Compact Series Operator's Manual page 18

Introduction
1.6.7 Hook
The entire Cargo Compact line has a heavy-duty hook, made of high-quality steel. This hook can be exchanged
on all models and can be used at two different height settings. It is very important that you always check
the hook for any defects before using it on the trailer. If you find that the catch of the hook no longer works
or no longer works completely, immediately order a new one from your dealer or the manufacturer under
article number 305-130-004-501.
NOTE! A hook or towing eye that shows any signs of wear must be replaced immediately.
Fig. 1-16 Screw hook
1.6.8 Towing eye
A towing eye serves to enable the trailer to be attached to the tractor. Here, it is also very important that you
always check the towing eye for any defects before using the trailer.
Fig. 1-17 Screw-type towing
eye Compact 13000/18000
18 18
Catch
art.no. 305-130-004-501
Hook height 1,450 mm
Hook height 1,570 mm
Fig. 1-18 Turnable towing eye
Compact 19000/21000