Fisher & Paykel ACTIVESMART RS90A Installation Manual page 21

For non-Ice & Water models only
Secure top studs into the
1
refrigerator doors, ensure the
open end faces the top.
Repeat on all refrigerator doors.
Door panels have full axis
4
adjustment to ensure they are
flush with adjacent walls, or until
satisfactory. To adjust the height
of the panels turn clockwise to
raise stud or counter-clockwise
to lower stud.
!4 HANG THE DOOR PANELS
Secure side screws mid-way into
2
the refrigerator doors x4 for each
French door and drawer (2x).
Repeat on all refrigerator doors.
Once satisfied, secure top door
5
studs with M8 washer and M8
nut. The top of the stud must
remain below the top face of
the door panel.
Hang door panel onto the top
3
studs and align the side bracket
forks onto the refrigerator door.
Ensure the forks are positioned
in the body of the side screw.
Secure side bracket forks by
6
tightening side studs.
Repeat this process for all
other non-Ice & Water panels.
19