Nesco ITR-01 User Manual page 12

OPERATING INSTRUCTIONS
5. Plug the power cord into a polarized 120 Volt A.C. electrical
outlet. If the plug does not fit try reversing the plug. If it still does
not fit, consult a qualified electrician.
6. Press the 'POWER' button. The Control Panel will be lit show-
ing default settings. (Default settings: High Heat, Center Heating
ON, Time 2:00 hours).
7. Press the " " or "
" keypad to increase or decrease cooking
time in "minute" increments. Maximum cooking time is 4:00
hours.
8. Press the "HEAT" button to select "HIGH" or "LOW" heat
settings. On HIGH setting two of the outside heaters are active at
all time. On LOW setting only one heater is active at all time.
9. Press "START/PAUSE" button to begin cooking. The digital
display will begin to countdown and show the time remaining.
The 'Circle of Heat' will show which heating elements are active
and will rotate around the food.
10. When the cooking cycle has finished, the roaster will beep
twice and the Digital Display will show "02:00" and the heating
elements will turn off automatically.
CAUTION: The Glass Cover will become very hot during use.
Always handle with care and use oven pads or mitts. The cooking
process creates steam that can cause burns.
11. Use a hot pad or oven mitt to carefully lift the Glass Cover
and set aside on a heat resistant surface. Tilt the Glass Cover
when opening so that the steam is directed away from the face
and hands.
• To ensure that the food is cooked properly, check the internal
temperature of the food periodically with a food thermometer.
12. Using the Rack Remover, insert the hook into the hole at the
end of the Heating Element Cover to lift the food from the Main
Body.
10