Table of Contents
Advertisement
Unloading the Extended Battery
Cabinet
CAUTION
!
This battery cabinet is heavy (see
weight on previous page). At least
two people should be present to
unload it from the pallet.
1. Once the Extended Battery Cabinet is near the
desired operating location, remove the card-
board cover.
2. Use a 13 mm (1/2") wrench to remove the four
mounting bolts from each of the pallet brack-
ets. Remove mounting brackets from the pallet
and cabinet. Keep brackets and bolts for future
transportation of cabinet or for additional sta-
bility once in place.
UNLOADING
3. Remove the metal ramp from the bottom of the
battery cabinet, rotating it. Fit ramp in pallet
slot as shown above.
4. Using two people, slowly move the cabinet
down the ramp until the Extended Battery
Cabinet is on a level surface.
5
Advertisement
Table of Contents
