Unloading; Unloading The Maintenance Bypass Cabinet - Liebert Nfinity Maintenance Bypass Cabinet User Manual

U M
NLOADING THE
B C
YPASS ABINET
CAUTION
!
This Maintenance Bypass Cabinet
is heavy (see weight in Dimensions
table on page 9). At least two
people should assist to unload it
from the pallet.
1. Once the Maintenance Bypass Cabinet is near
the desired operating location, remove the
cardboard cover.
2. Use a 1/2" (13mm) wrench to remove the eight
mounting bolts (four per bracket) from the
pallet brackets. Remove mounting brackets
from the pallet and Maintenance Bypass
Cabinet. Keep brackets and bolts for future
transportation of the Maintenance Bypass
Cabinet or for securing the cabinet to the floor.

UNLOADING

AINTENANCE
3. Remove the metal ramp from the bottom of the
pallet, rotating it 180°. Fit ramp onto opposite
side of pallet (in slot) as shown below.
4. Using two people, slowly roll the Maintenance
Bypass Cabinet down the ramp until the
Maintenance Bypass Cabinet is on a level
surface.
10