Enlarged Copy Menu - Epson SC-T5100 User Manual

SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series

Enlarged Copy menu

Displayed when an Epson A3 or A4 scanner is connected to the printer. Set scaling in this menu to enable enlarged
printing of the scanned documents.
"Making Enlarged Copies with an A3 or A4 Scanner" on page 96
U
*Default setting
Settings item
Copies
Color Mode
Original Size
Reduce/Enlarge
Auto Fit Page
Custom Size
Density
Quality
Using the Menu
Settings value
1 to 99
Black/White
*
Color
A4
A5
A3
B5
B4
Letter
13 x 18 cm (5 x 7 in)
*
On
Off
Actual Size
A0
US E (34x44in)
JIS B1
A1
US D (22x34in)
JIS B2
US C (17x22in)
A2
User-Defined
*
-4 to 4 (0 )
Speed
Fine
User's Guide
Explanation
Specify the number of copies.
Choose whether to do enlarged copying in color or in black and
white.
Select the document size loaded on the scanner. The sizes available
vary with the scanner. Sizes other than those shown here cannot be
used.
Setting this to On means that the copy is enlarged so that the short
edge of the document fits the width of the roll paper currently
loaded in the printer.
If the short edge of the document is wider than the roll paper, this
will be printed at actual size.
If the printer is unable to detect the width of the roll paper, then an
error will occur when copying is started.
Select the output size. To the left of each size, the percentage of
enlargement of the selected document size is displayed.
A0, US E, and B1 display only SC-T5100 Series/SC-T5100N Series.
If the desired size is not on the list, then in User-Defined, set a
desired size.
Choose copy density.
Choose Copy Quality in view of image quality and print speed.
133