Epson SC-T5100 User Manual page 54

SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series
G
Select Select Target in Print Quality.
Choose an option according to the type of
document and how it will be used.
To set the color correction method or color
balance in detail to match your preferences,
clear the Simple Settings check box. See the
following for more details.
"Correct color and print" on page 68
U
H
Check that the Print Preview check box is
selected and then click Print.
If a preview is not necessary, clear the check box
and then click Print.
Note:
In the print preview, you can check and change
the print settings while viewing the image to be
actually printed. We recommend to check with the
preview when printing on roll paper or large-sized
paper.
Printing with the Printer Driver from Your Computer
User's Guide
I
Check the print settings in the print preview
screen, and if there is no problem, click Print to
start printing.
The icons and menus at the top of the preview
screen allow you to change the image display
settings. You can change the print settings using
the menus on the right side. See the help for
more details.
Note:
See the printer driver help for more details on setting
items. Click in the printer driver settings dialog box
to display Help.
How to Select the Dedicated Printer
Driver for This Printer
You can print using AirPrint from a Mac computer.
However, printing by automatically fitting the
document to the width of the roll paper and selecting a
print quality suitable for the print target are not
possible. If the menus described in the previous
section "Basic Printing Procedure" are not displayed,
select the dedicated printer driver for the printer in
Printer. The dedicated printer driver for this printer is
displayed as follows.
❏ When USB connection: EPSON SC-TXXXX
❏ When network connection: EPSON TXXXX or
EPSON TXXXX-YYYYYY
*: "XXXX" is the product model number. "YYYYYY" is the last
six digits of the MAC address.
If the dedicated printer driver for this printer is not
displayed in the list, add it with the following
procedure.
54