15 June 2016
14. Trim and connect the 3/8" fuel hose from step 8 to the outlet of the pump. Use
a hose clamp to secure this connection. The remainder of the hose will be used
15. Cut the hard fuel supply
line once again, this time
about 8" before the inlet of
the pump. This time you
will need to use a tube
cutter.
Install a small section of
hose to the hard line.
Then to the pump inlet
which will be on the other
side of the frame rail.
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
#1050305D 2003-2004½ Dodge Cummins FlowMAX Lift Pump Kit (I-00169)
for the inlet of the pump.
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
- 9 -