Table of Contents
Advertisement
15 June 2016
11. Locate the two supplied
T Bolt band clamps;
unthread the nut (7/16"
Socket) from each of
them. Spread the clamps
apart and insert them
through boxed cutouts.
With both clamps
inserted, place the pump
into place and align the
inlet and outlet parallel to
the frame.
The pump inlet "IN" and
fuel filter are pointed to
the tank fuel pickup.
Tighten the clamps
around the motor body,
as seen in photo.
Do not tighten clamps
around the pump end
caps as seen in the two
bottom photos. Make
sure the clamps are
evenly spaced on the
motor body.
Torque nuts to no more
than 72 in-lbs.
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
#1050305D 2003-2004½ Dodge Cummins FlowMAX Lift Pump Kit (I-00169)
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
Insert clamp
through cutout
Insert clamp
through cutout
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
- 7 -
Advertisement
Table of Contents
