Table of Contents
Advertisement
15 June 2016
12. Insert the Filter fitting
(1500311-M) into the (IN)
side of the pump and the
ORB fitting (1500311) into
the outlet of the pump. Do
not over tighten as they
use an o-ring for sealing.
NOTE: If installing a filter kit,
skip this step and refer to the
Flomax Filter Kit manual for
the install procedure for the
water separator and fuel filter.
Once Filter install is complete;
continue to step 13.
13. With
the
mounted, cut the hard
fuel line about 12"
from the outlet side of
the
pump
inside of the frame
rail.
The fuel supply
line is the thickest of
all three lines. Discard
the
remainder/cut
portion of the cut fuel
line.
A tube cutter does not
need to be used for
this cut.
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
#1050305D 2003-2004½ Dodge Cummins FlowMAX Lift Pump Kit (I-00169)
pump
on
the
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
Fitting
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
- 8 -
Fitting
Advertisement
Table of Contents
