Table of Contents
Advertisement
15 June 2016
Mounting Option 2 - Mounting the Pump Bracket to the Frame
9. From underneath the vehicle
locate
the
bracket on the inside of the
driver's frame rail.
and tape drill template (from
the back of this manual) onto
the frame rail just above the
weld.
Place fuel pump and
bracket in place to ensure
ample clearance.
Mark
holes
punch.
template and drill pilot holes
to 1/8".
Drill main holes to
21/64".
10. Insert
the
isolators (1500356) into the
support bracket.
water to aid in lubricating the
isolators as the slide into the
bracket.
Place
the
(1500357) on the inside of the
bracket against the rubber
isolator.
Using a air ratchet (9/16"
socket)
tighten
threading 3/8" bolt (1500359)
through each hole if the
support
bracket
and into the frame. Repeat
this step for the other 2 bolts.
Torque the three bolts to 25ft-
lbs
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
#1050305D 2003-2004½ Dodge Cummins FlowMAX Lift Pump Kit (I-00169)
cross
member
Position
with
center
Remove
drill
three
rubber
Use some
large
washers
the
self-
assembly
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
- 6 -
Advertisement
Table of Contents
