Recording Schedule - HIKVISION DS-7732NI-I4/16P Quick Start Manual

10
V I E W L I V E V I D E O
Live View displays real-time video.
11
S E T U P R E C O R D I N G
The system defaults to continuously record video at 8 fps, or at 15 fps when motion is detected.
 Recording Schedule
Default is to continuously record everyday. Do the following to change the recording schedule:
1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.
2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.
3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect
(days will turn gray [off]) the calendar days you wish to record.
4. Apply time settings as desired.
5. Press APPLY.


Icons in the upper right of screen show
each camera's record and alarm status.
• Alarm (video loss, tampering, motion
detection, sensor alarm, or VCA
alarm)
• Record (manual record, continuous
record, motion detection, alarm, or
VCA triggered record)
• Event/Exception (event and
exception information appears at
lower-left corner of screen)

 
 TYPE
Motion or Continuous (default)
 COLOR
Shows Recording Schedule days:
• Blue=Continuous
• Yellow=Event (motion/alarm)
• Grey=None
 TIMES
Customize schedule times (ignore for
"motion only" recording)
 ADD
Press to add time settings to
schedule
 ENABLE SCHEDULE
If not checked, camera will not record