Softlogix Ethernet/Ip Module Status Indicators; Link Status (Link) Indicator - Allen-Bradley SoftLogix 5800 User Manual

SoftLogix EtherNet/IP
Module Status Indicators
This section describes the EtherNet/IP modules' status indicators for the
SoftLogix system.
The EtherNet/IP modules have these status indicators.
Indicator
1
2

Link Status (LINK) Indicator

LINK Indicator Display
Off No link
Flashing green Data transmission
Solid green Link OK
Rockwell Automation Publication 1789-UM002K-EN-P - January 2015
Status Indicators
1
2
Description
Module display status
Module status indicators
Description
• The module is not connected to a powered Ethernet device.
• The module cannot communicate on Ethernet.Verify that all
Ethernet cables are connected.
• Verify that the Ethernet switch is powered.
• The module is communicating on Ethernet.
• Normal operation. No action required.
• The module is connected to a powered Ethernet device.
• The module can communicate on Ethernet.
• Normal operation. No action required.
Appendix F
259