Table of Contents
Advertisement
This SoftLogix Chassis Monitor now shows the new controller in slot 1.
Change the RSLinx Software Slot
The RSLinx software module automatically defaults to Slot 0 in the chassis. But
you can program the virtual backplane to use the RSLinx module in another slot
before starting up the SoftLogix application. This flexibility allows a SoftLogix
module to be used in Slot 0 if so desired.
Complete these steps to set up RSLinx software, version 2.59.00 or later, in the
chassis.
1. In RSLinx software, from the Communications menu, choose
Configure Drivers.
The Configure Drivers dialog box appears.
2. From the Available Driver Types pull-down menu, choose
Virtual Backplane.
Rockwell Automation Publication 1789-UM002K-EN-P - January 2015
What is the SoftLogix System?
Chapter 2
29
- Quick Links:
- Install the Softlogix 5800 Controller
Hide quick links:
Advertisement
Table of Contents
