ZyXEL Communications NWA3560-N User Manual page 261

Table 101 Syst em Logs ( cont inued)
LOG MESSAGE
The request IP is: %s,
sent from %s
Received ARP response
NOT for the request IP
address
Receive an ARP
response from the
client issuing the
DHCP request
Receive an ARP
response from an
unknown client
In total, received %d
arp response packets
for the requested IP
address
Clear arp cache
successfully.
Client MAC address is
not an Ethernet
address
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
IP confliction is
detected. Send back
DHCP-NAK.
Clear ARP cache done
NTP update successful,
current time is %s
NTP update failed
Device is rebooted by
administrator!
Collect Diagnostic
Information has failed
- Server did not
respond.
Collect Diagnostic
Infomation has
succeeded.
NWA3000-N Series User's Guide
DESCRIPTION
The device accept ed a request .
The device received an ARP response t hat is NOT for t he request ed I P
address.
The device received an ARP response from t he client issuing t he
DHCP request .
The device received an ARP response from an unknown client .
The device received t he specified t ot al num ber of ARP response
packet s for t he request ed I P address.
The ARP cache was cleared successfully.
A client MAC address is not an Et hernet address.
The device received a DHCP request t hrough t he specified int erface.
I P conflict was det ect ed. Send back DHCP- NAK.
Clear ARP cache done.
The device successfully synchronized wit h a NTP t im e server .
% s is t he dat e and t im e.
The device was not able t o synchronize wit h t he NTP t im e server
successfully.
An adm inist rat or rest art ed t he device.
There was an error and t he diagnost ics were not com plet ed.
The diagnost ics script s were execut ed successfully.
Appendix A Log Descriptions
261