37.
FIRMWARE UPGRADE
Software updates for Fisher Scientific accumet
become available. Follow the procedure outlined in this section to download and install updated software
for your instrument. Please read the entire procedure before starting. Note: this procedure will erase all
data in your instrument to the factory default conditions – save any critical data before upgrading.
1) Determine the software version that is used by your instrument by either;
Observing the temporary display
screen during power on sequence
2) Check www.fishersci.com/accumet or send an email to accumet@fishersci.com to determine if
newer software is available for your instrument. Download the update or request the new software to be
emailed to you as an attachment.
®
XL150, XL200, XL250, XL500, & XL600 series may
Selecting the "About XL" icon
51