Parameter Setup: Print Criteria - Fisher Scientific accumet XL150 accumet XL200 accumet XL250 accumet XL500 accumet XL600 Reference Manual

14.

PARAMETER SETUP: PRINT CRITERIA

The Print Criteria setting is available from any parameter Setup. Use this option to select which criteria are
printed along with the measurement when you print the data.
To Set Print Criteria:
1. Select Touch here to edit next to Print Criteria.
2. Select ON or OFF for each detail.
3. For Print Interval select Log Data or Timed. If Log Data is selected, clicking on the "Print" button
from the Measurement screen will send the data to the printer. If Timed is selected, you can print data
at a pre-determined interval. This data is buffered and sent to the printer when the page is full.
4. Select OK to accept your selections.
20