Advertisement
Aim and Lock the Fixtures
Make sure power is ON before aiming fixtures.
1. Aim the fixtures by rotating each fixture to the correct angle.
2. Lock the fixtures by tightening the locking bolts using a 28 mm hex or
adjustable wrench.
Philips Color Kinetics
3 Burlington Woods Drive
Burlington, Massachusetts 01803 USA
Tel 888.385.5742
Tel 617.423.9999
Fax 617.423.9998
www.philipscolorkinetics.com
Do not look directly into the fixture when
E
aiming and locking.
For exterior applications with direct exposure
E
to water, ColorReach Compact Powercore fixtures
should not be aimed directly upwards, as water
may pool on the lens and affect beam quality.
Instead, the fixture should be angled to allow for
proper water drainage.
Copyright © 2012–2014 Philips Solid-State Lighting Solutions, Inc. All rights reserved.
Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast,
ColorBlaze, ColorBurst, ColorGraze, ColorPlay, ColorReach, iW Reach, eW Reach, eW Fuse,
DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore
are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in
the United States and / or other countries. All other brand or product names are trademarks
or registered trademarks of their respective owners. Due to continuous improvements and
innovations, specifications may change without notice.
Cover Photo: Eden Park, Auckland, New Zealand,
by Patrick Reynolds
5º
8º
13º
23º
40º
63º
5º x 17º
DAS-000109-00 R01 5-14
Advertisement
