Advertisement
2. Ensure that the fixture mounting locations and substrates are sufficiently sturdy to
bear the weight of each ColorReach Compact Powercore fixture. Pre-drill holes
in the mounting substrate if necessary, making reference to the mounting bracket
dimensions. Use at least two screws to secure each fixture, one on either side of
the mounting bracket's central screw hole.
If mounting ColorReach Compact Powercore on a lighting pole, make sure the
pole can both support the total weight of the fixtures and withstand the maximum
velocity winds to which it will be subjected. Each fixture weighs 51 lb (23 kg), and
has an effective projected area (EPA) of 0.186 m
3. Install all Data Enabler Pro devices, including any interfaces with controllers. Data
Enabler Pro and external controllers send power and control signals to fixtures
over the single leader cable.
4. Verify that all additional supporting equipment (switches, controllers) is in place.
5. Ensure that all additional parts and tools are available, including:
• A 28 mm hex or adjustable wrench for adjusting the locking bolts on the
fixture bracket.
• One electrical junction box per fixture, rated for your application. (Refer to
the junction box manufacturer's literature for additional items required for
mounting or sealing.)
• A sufficient length of 4-conductor copper wire. We recommend 12 AWG
(2.05 mm) stranded wire.
• Conduit as required.
• Electronics-grade room temperature vulcanizing (RTV) silicone sealant.
Unpack the Fixtures
1. Unpack ColorReach Compact Powercore fixtures. Because each ColorReach
Compact Powercore fixture weighs 51 lb (23 kg), you may need two people to lift
the fixture out of the box and position it in the mounting location.
2. Each ColorReach Compact Powercore fixture comes pre-programmed with a
unique serial number. As you unpack the fixtures, record the serial numbers in a
layout grid (typically a spreadsheet or list) for easy reference and light addressing.
3. Assign each fixture to a position in the lighting design plan.
Item: 999-999999-99
DC: 0752 ABC 1234
0000 00
12NC: 9104 036 00112
S/N:
ABCD abcd ABCD abcd 24CHR
FFAB0099
ABCD abc 40CHR
Item: 999-999999-99
DC: 0752 ABC 1234
12NC: 9104 036 00112
S/N:
ABCD abcd ABCD abcd 24CHR
ABCD abc 40CHR
4. To streamline installation and aid in light show programming, you can affix a
weatherproof label identifying the order or placement in the installation to an
inconspicuous location on each light fixture's housing.
10
ColorReach Compact Powercore
.
2
0000 00
FFAB0099
Product Guide
Mounting bracket dimensions
for pre-drilling
Ø27 mm
Ø14 mm
(.5 in) 4X
(1.05 in)
89 mm
(3.5 in)
152 mm
(6 in)
C
Do not rest ColorReach Compact
E
Powercore on its back, as doing so
may damage the connector port. Be
careful not to tip the fixture over during
positioning.
345 mm
(13.6 in)
692 mm
(27.25 in)
C
Advertisement
