Advertisement
3. If necessary, remove the connector cap from the port on the back of the
ColorReach Compact Powercore housing. Insert the leader cable into the port.
Turn the leader cable's lock nut to the right until it locks into place.
4. Use wire nuts to connect line, neutral, ground, and data. If installing in series,
connect the leader cable from each fixture to the fixture's junction box.
If installing in parallel, connect the leader cable from each fixture to the lead wire
from the Data Enabler Pro in the common junction box.
5. Tuck wire connections into the junction box.
6. Seal all junction boxes with electronics-grade RTV silicone sealant. Use gaskets,
clamps, and other parts and fittings required to comply with local outdoor wiring
codes.
8 mm hex or
5/16 in hex
UL / cUL
N
7. Run the wiring from the first junction box in the series to the Data Enabler Pro,
or, if installing in parallel, run the wiring from the common junction box to the
Data Enabler Pro. Secure connections within the Data Enabler Pro housing.
UL / cUL
N
DMX
UL / cUL
DMX
UL / cUL
8. Secure the Data Enabler Pro cover. Seal the Data Enabler Pro with electronics-
grade RTV silicone sealant.
14
ColorReach Compact Powercore
UL / cUL
CE / PSE
N
To fixtures
CE / PSE
N
L
N
L
N
CE / PSE
UL / cUL
CE / CQC
Line voltage
CE / CCC
CE / CQC
PSE
Product Guide
CE / PSE
CE / PSE
UL / cUL
N
UL / cUL
N
Data
Line
Voltage
ColorReach Compact Powercore fixtures
installed in parallel
UL / cUL
CE / PSE
CE / PSE
UL / cUL
CE / CQC
PSE
CE / Japan
UL / cUL
CE / PSE
CE
UL / CE (100–277 VAC)
CQC (100–240 VAC)
CE / PSE
N
CE / PSE
N
UL / cUL
CE / CQC
CE / CCC
CE / PSE
CE / PSE
CCC
CE / PS
CE / Jap
CE
CE / PS
CQC
Advertisement
