Return Procedure; Technical Data - Siemens SIPART PS2 6DR5xx0 series Compact Operating Instructions

WARNING
Improper connection after maintenance
Risk of explosion in areas subject to explosion hazard.
Connect the device correctly after maintenance.
•
Close the device after maintenance work.
•
Refer to Electrical (Page 17).
6.3.1 Repair/Upgrading
Send defective devices to the repairs department, together with information on the malfunction and the cause of the
malfunction. When ordering replacement devices, please provide the serial number of the original device. You can find the
serial number on the nameplate.
6.4

Return procedure

Enclose the bill of lading, return document and decontamination certificate in a clear plastic pouch and attach it firmly to the
outside of the packaging. Any devices/replacement parts which are returned without a decontamination declaration will be
cleaned at your expense before further processing. For further details refer to the operating instructions.
See also
Return document (http://www.siemens.com/processinstrumentation/returngoodsnote)
Decontamination declaration (http://www.siemens.com/sc/declarationofdecontamination)
6.5 Disposal
7

Technical data

7.1 All device versions
7.1.1 Operating conditions
Rated conditions
Ambient conditions
Ambient temperature
Permissible ambient temperature for operation
•
Height
•
Relative humidity
•
Degree of pollution
Overvoltage category
38
Devices described in this manual should be recycled. They may not be disposed of in the municipal
waste disposal services according to the Directive 2012/19/EC on waste electronic and electrical
equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally approved disposal service for
eco-friendly recycling. Observe the specific regulations valid in your country.
Further information about devices containing batteries can be found at: Information on
battery/product return (WEEE) (https://support.industry.siemens.com/cs/document/109479891/)
For use indoors and outdoors.
In hazardous areas, observe the maximum permissible
ambient temperature corresponding to the temperature
class.
2)3) -30 ... +80 °C (-22 ... +176 °F)
2000 m above sea level. At altitudes greater than 2000 m
above sea level, use a suitable power supply.
0 ... 100%
2
II
SIPART PS2 (6DR5...)
A5E03436620-AB, 01/2017