Siemens SIPART PS2 6DR5xx0 series Compact Operating Instructions page 39

Pneumatic data
Sound pressure level
The following applies to fail in place: 3 ... 7 bar (43.5 to 101.5 psi)
1)
When using device versions Ex d (6DR5..5-... and 6DR5..6-...), values are reduced by approximately 20%.
2)
7.1.3 Construction
Construction
How does it work?
Range of stroke (linear actuator)
•
Angle of rotation (part-turn actuator)
•
Mounting method
On the linear actuator
•
On the part-turn actuator
•
Weight, positioner without option modules or accessories
6DR5..0 Glass-fiber reinforced polycarbonate enclosure
•
6DR5..1 aluminum enclosure, narrow
•
6DR5..2 stainless steel enclosure
•
6DR5..3 aluminum enclosure
•
6DR5..5 aluminum enclosure, flameproof
•
6DR5..6 stainless steel enclosure, flameproof
•
Material
Enclosure
•
6DR5..0 Makrolon
6DR5..1 aluminum, narrow
6DR5..2 stainless steel
6DR5..3 aluminum
6DR5..5 aluminum, flameproof
6DR5..6 stainless steel enclosure, flameproof
Pressure gauge block
•
Versions
In Makrolon enclosure 6DR5..0
•
In aluminum enclosure 6DR5..1
•
In aluminum enclosures 6DR5..3 and 6DR5..5
•
In stainless steel enclosures 6DR5..2 and 6DR5..6
•
Torques
Part-turn actuator fixing screws DIN 933 M6x12-A2
•
Linear actuator fixing screws DIN 933 M8x16-A2
•
Gland pneumatic G¼
•
Gland pneumatic ¼" NPT
•
40
L < 75 dB
A eq
L < 80 dB
A max
3 ... 130 mm (0.12 ... 5.12") (angle of rotation of the
positioner shaft 16 ... 90°)
30 to 100°
Using mounting kit 6DR4004-8V and, where necessary,
an additional lever arm 6DR4004-8L on actuators
according to IEC 60534-6-1 (NAMUR) with a fin, columns,
or a plane surface.
Using mounting kit 6DR4004-8D on actuators with
mounting plane according to VDI/VDE 3845 and
IEC 60534-6-2: The required mount must be provided on
the actuator-side.
Approximately 0.9 kg (1.98 lb)
Approx. 1.3 kg (2.86 lb)
Approx. 3.9 kg (8.6 lb)
Approx. 1.6 kg (3.53 lb)
Approx. 5.2 kg (11.46 lb)
Approx. 8.4 kg (18.5 lb)
Glass-fiber reinforced polycarbonate (PC)
GD AISi12
Austenitic stainless steel 316 Cb, mat. No. 1.4581
GD AlSi12
GK AISi12
Austenitic stainless steel 316 L, mat. no. 1.4409
Aluminum AIMgSi, anodized or stainless steel 316
Single-acting and double-acting
Single-acting
Single-acting and double-acting
Single-acting and double-acting
5 Nm (3.7 ft lb)
12 Nm (8.9 ft lb)
15 Nm (11.1 ft lb)
SIPART PS2 (6DR5...)
A5E03436620-AB, 01/2017