Maytag MHN33PDCWW Installation Instructions Manual page 38

ELECTRONIC CONTROL SETUP INSTRUCTIONS
C.20 VALUE OF COIN 2 (WASHER)
C.20 PD MODELS: This represents the value of coin
2 in number of nickles. 20 = $1.00.
Increase between 1 and 200 nickles by
pressing the POWERWASH buttonand
decrease by pressing the TEMPERATURE
button.
C.05 PR models only: For models using Enhanced
Debit, this field represents the value of top off
in nickles, for the dryer, or $.25.
Factory default of C.05; represents 5 x $.05,
or $.25.
Press the EXTRA RINSE button once
to advance to next code.
E.00 ADD COINS OPTION (WASHER)
This option is either selected On or not selected
Off. This option causes the customer display
to show the number of coins (Coin 1) to enter,
rather than the dollars-and-cents amount.
E.00 Not selected Off.
E.AC Selected On.
Press DELICATES button three consecutive
times for this selection.
PR models only: In enhanced debits mode, this
option is not selectable.
Press the EXTRA RINSE button once
to advance to next code.
Wash Upgrades (WASHER)
H.00 COOL Temperature Upgrade Price—Set between
COOL
0 and 200 by pressing the POWERWASH
(increase) button or pressing the TEMPERATURE
(decrease) button. Factory preset for 0 coins = $0.00.
H.00 WARM Temperature Upgrade Price—
WARM Set between 0 and 200 by pressing the
POWERWASH (increase) button or pressing
the TEMPERATURE (decrease) button.
Factory preset for 0 coins = $0.00.
H.00 HOT Temperature Upgrade Price—Set
HOT between 0 and 200 by pressing the
POWERWASH (increase) button or pressing
the TEMPERATURE (decrease) button. Factory
preset for 0 coins = $0.00.
H.01 EXTRA RINSE Upgrade Price—Set between
EXTRA 0 and 200 by pressing the POWERWASH
RINSE (increase) button or pressing the
TEMPERATURE (decrease) button. Factory
preset for 1 coins = $0.25.
Press the EXTRA RINSE button once to
advance to next code.
J.Cd COIN/DEBIT OPTION (WASHER)
J.Cd Both coin and debit selected.
J.d Debit card selected, coins disabled. Press the
DELICATES button three consecutive times for
this selection.
J.C Coins selected, debit disabled. Press the
DELICATES button three consecutive times for
this selection.
J.Ed Enhanced Debit is self-selected when a
Generation 2 card reader is installed in the
washer. The Ed option cannot be manually
selected or deselected.
Press the EXTRA RINSE button once to
advance to next code.
38
L.00 PRICE SUPPRESSION OPTION
(WASHER)
This option causes the customer display to
show "ADD" or "AVAILABLE" rather than the
amount of money to add. (Used mainly in debit
installations.)
L.00 Not selelcted Off
L.PS Selected On. Press the DELICATES button
once for this selection.
Press the EXTRA RINSE button once
to advance to next code.
n.CE CLEAR ESCROW OPTION (WASHER)
When selected, money held in escrow for 30
minutes without further escrow or cycle activity
will be cleared.
n.CE Selected On.
n.00 Not selected off. Press the DELICATES button
once to deselect this selection.
Press the EXTRA RINSE button once to
advance to next code.
r.800 TOP SPIN SPEED RPM (WASHER)
r.800 This can be selected from the following spin
speeds: 600rpm, 750 rpm, 800 rpm, 1000
(displays as 999) rpm. Step between speeds
by pressing the DELICATES button. Factory
default of 800rpm.
Press the EXTRA RINSE button once
to advance to next code.
U.00 PENNY INCREMENT OFFSET (DRYER)
U.00 This represents the penny increment price
offset used in Generation 2 (Enhanced Debit)
PR models. Choose from 0-4 pennies by
pressing the HEAVY DUTY button.
U.00 COIN (HUNDREDTH) INCREMENT OFFSET
(WASHER)
U.00 This represents the penny increments price
offset used in Generation 2 (Enhanced Debit)
PR models. Increase from 0-4 pennies by
pressing the POWERWASH button decrease
by pressing TEMPERATURE button.
Press the EXTRA RINSE button once to
advance to next code.
CYCLE SETTINGS (WASHER)
A1.03 PREWASH LENGTH
This is the number of minutes of PREWASH.
Set bewtween 2 and 7 by pressing the
POWERWASH (Increase) button or pressing
the TEMPERATURE (decrease) button.
Press the EXTRA RINSE button once to
advance to next code.
A2.03 FINAL SPIN LENGTH
This is the number of minutes of final high-speed
spin. Set between 3 and 8 by pressing the
POWERWASH (increase) button or pressing
the TEMPERATURE (decrease) button.
Press the EXTRA RINSE button once to
advance to next code.