Check Your Programming - White Rodgers 1F82-261 Installation And Operation Instructions Manual

1st period cooling start time and temperature).
Use the table to plan your program time periods and the tem-
peratures you want during each period. Fill in the complete table
to have a record of your programs.
Entering Your Program
Set Current Time and Day
2. Press and hold either
begins at noon).
minutes only.
4. Press and hold either
minutes.
6. Press or
7. Press RUN once. The display will show the correct time and
room temperature alternately.
Enter Heating Program
MO TU WE TH FR
program) will appear in the display. Also displayed are the
currently programmed start time for the 1st heating period
and the currently programmed temperature (flashing).
TU TH FR
3. Press or to change the displayed temperature to
your selected temperature for the 1st heating program period.
or until your selected time appears. The time will
perature mode.
setpoint temperature for the 2nd heating program period will
appear.
6. Repeat steps 3 and 4 to select the start time and heating
temperature for the 2nd heating program period.
1st period heating
or until you reach the correct
AM begins at midnight; PM
or until you reach the correct
HEAT.
7. Repeat steps 3 through 5 for the 3rd and 4th heating program
periods.
heating period and the currently programmed temperature.
programming.
programming.
press RUN.
Enter Cooling Program
If the outside temperature is below 50°F, disconnect
power to the cooling system before programming.
Energizing the air conditioner compressor during cold
weather may cause personal injury or property damage.
2. Follow Enter Heating Program for entering your cooling

CHECK YOUR PROGRAMMING

may change any time or temperature during this procedure).
3. Press RUN.
begin program operation.
NOTE
thermostat will maintain time and continuously display the tem-
perature during a loss of AC power. Installed batteries will also
-
allow programming prior to installation.
YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO
PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
-
7
OPERATION
SA
SU
▲
CAUTION
!
COOL position.
HEAT position.
COOL position.
HEAT or COOL and press RUN to
-