Check Your Programming; Enter Heating Program - White Rodgers 1F88-270 Installation Instructions Manual

OPERATION OPERATION
OPERATION OPERATION OPERATION
Heating/Cooling Schedule Plan
WEEKDAYS
(5 Day)
Start
Period
Time Temp
MORN
DAY
EVE
NITE
MORN
DAY
EVE
NITE

Enter Heating Program

Enter Heating Program Enter Heating Program
Enter Heating Program Enter Heating Program
1. Press the SYSTEM button to HEAT.
2. Press PRGM once. "MO TU WE TH FR MO TU WE TH FR MO TU WE TH FR MO TU WE TH FR" (indicating
MO TU WE TH FR
weekday program) will appear in the display. Also dis-
played are the currently programmed start time for the
1st heating period and the currently programmed temp-
erature (flashing).
EXAMPLE:
This display window shows that for the 1st weekday
period, the start time is 6:00 AM and 68° is the program-
med temperature (this example reflects factory prepro-
gramming.
3. Press or to change the displayed temperature
to your selected temperature for the 1st heating program
period.
4. Press TIME once (the programmed time will flash). Press
or until your selected time appears. The time
will change in 15 minute increments. When your selected
time is displayed, press TIME again to return to the
change temperature mode.
5. Press PRGM once. The currently programmed start time
and setpoint temperature for the 2nd heating
period will appear.
6. Repeat steps 3 and 4 to select the start time and heating
temperature for the 2nd heating program period.
7. Repeat steps 3 through 5 for the 3rd and 4th heating
program periods.
8. Press PRGM once "SA SA SA SA SA" (indicating Saturday program)
will appear in the display, along with the start time for the
1st heating period and the currently programmed temp-
erature.
9. Repeat steps 3 through 7 to complete Saturday heating
programming.
10.Press PRGM once to change to "SU
programming and repeat steps 3 through 7 to complete
Sunday programming.
11.When you have completed entering your heating pro-
gram, press RUN.
10
SUNDAY
SATURDAY
(1 Day) (1 Day)
Start Start
Time Temp Time Temp
2nd heating 2nd heating 2nd heating 2nd heating program
SU SU SU" (Sunday) heating SU

CHECK YOUR PROGRAMMING

CHECK YOUR PROGRAMMING
CHECK YOUR PROGRAMMING CHECK YOUR PROGRAMMING CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming
one final time before beginning thermostat operation.
1. Press SYSTEM button to HEAT
2. Press PRGM to view the 1st weekday heating period
time and temperature. Each time you press PRGM, the
next heating period time and temperature will be display-
ed in sequence for weekday, then Saturday and Sunday
program periods (you may change any time or tempera-
ture during this procedure.
3. Press RUN.
4. Press SYSTEM button to COOL
5. Repeat step 2 to check cooling program.
6. Press SYSTEM button to HEAT
RUN to begin program operation.
NOTE: Batteries are not required to keep your programming
or menu data. With two optional "AA" batteries installed,
your thermostat will maintain time and continuously
display the temperature during a loss of AC power.
Installed batteries will also allow programming prior to
installation.
YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO
PROVIDE MAXIMUM COMFORT AND EFFICIENCY! PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
PROVIDE MAXIMUM COMFORT AND EFFICIENCY! PROVIDE MAXIMUM COMFORT AND EFFICIENCY! PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
HEAT position. HEAT HEAT HEAT
COOL position. COOL COOL
COOL
HEAT or COOL HEAT HEAT HEAT COOL and press COOL COOL COOL