Installing Sapera Lt; Camera Firmware Updates; Firmware Via Linux Or Third Party Tools - Dalsa CALIBIR 640 GigE User Manual

Installing Sapera LT

Note: to install Sapera LT and the GigE Vision package, logon to the workstation as an administrator or
with an account that has administrator privileges.
When Calibir GigE is used in a Sapera development environment, Sapera LT 8.10 needs to be
installed, which automatically provides all GigE Vision camera support.
If no Sapera development is required. then the Sapera LT SDK is not needed to control the
Linea GigE camera. Sapera runtime with CamExpert provides everything to control the camera.
Procedure
Download and install Sapera 8.10 which automatically provides GigE Vision support.
•
Connect the camera to an available Gigabit NIC.
•
Refer to Sapera LT User's Manual concerning application development with Sapera.
Note: The Teledyne DALSA Sapera CamExpert tool (used throughout this manual to describe Calibir GigE
features) is installed with either the Sapera LT runtime or the Sapera LT development package.

Camera Firmware Updates

Under Windows, the user can upload new firmware, downloaded from Teledyne DALSA support,
using the File Access Control features provided by the Sapera CamExpert tool.

Firmware via Linux or Third Party Tools

Consult your third party GigE Vision software package for file uploads to the connected device.
52 • Operational Reference Calibir 640 GigE IR Camera User's Manual