Samsung FX 505 Operator's Manual page 15

Setting Date and Time
Your fax machine has a timer function
it possible to
which makes
documents at a later time. In order to
accomplish this, the date and time
settings must be programmed. Note that
the time must be entered in 24-hour
format (refer to the box below). The date
and time also appear in various reports.
In addition, they are added to the top of
all transmitted copies along with your
name and number if you set the feature
to be activated through the user options
(see page 36).
To set or change the date and time,
[5].
press [FUNCTION], then Follow the
steps at right.
For times before
For This Time
Noon or after
Midnight, use the
Noon
same numbers as
1 : 00 P.M.
12-hour time,
2 : 00 P.M.
being sure to use
3 : 00 P.M.
four digits ; for
4 : 00 P.M.
example, enter
5 : 00 P,M.
2 : 00 A.M. as
6 : 00 P.M.
0200, enter 9 : 30
7 : 00 P.M.
A.M. as 0930.
8 : 00 P.M.
9 : 00 P.M.
For times from
1O : 00 P.M.
Noon through
11 : 00 P.M.
Midnight, use the
Midnight
entries shown in
the table at right.
S e t t i n g U p B a s i c I n f o r m a t i o n
Window Message
send
Type This
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
0000
Your Response
Press [YES].
Using numeric keys, enter the month
(MM), day (DD), and year (YY) with a 2-
digit number. And enter the hour (hh),
and minute (mm) in 24-hour format.
For example, to enter September 15,
1992, 3 : 30 P.M., you would type 09 for
the month, 15 for the day, 92 for the
year, 15 for the hour, 30 for the minute.
If you make a mistake while entering the
date and time, press [NO]. The last
entered number is cleared each time you
press [NO].
Your entry appears in the bottom of the
window. If the information you have
entered is correct, press [YES].
The unit returns to the standby mode and
the LCD window displays the newly-set
date and time.