Controlling Transmission Quality - Samsung FX 505 Operator's Manual

Integrated personal facsimile
Table of Contents

Advertisement

Preparing a Good Original
To prevent jamming and ensure good
results on the receiving fax machine:
Remove all staples, clips, and tape from
l
the original documents.
If you must re-fax a document that was
l
faxed to you, we recommend that you
make a copy of it on a regular office
copier, and fax the copy for better
transmission quality.
To
create
good
quality
documents, do the following:
Type them instead of writing.
l
When writing, use a felt-tip pen and
l
black ink.
Use white paper.
l
Do not try to send documents that are:
Wet or damp
l
Covered with wet ink or paste
l
Too thin (such as onionskin, airmail
l
paper, or pages from a magazine)
Chemically
p r o c e s s e d ( s u c h a s
l
pressure-sensitive paper or carbon-
coated paper)
Coated (such as glossy paper)
l
Too small or short (such as a label or
l
card)
Made of cloth or metal
l

Controlling Transmission Quality

Use an office copier to piece together
several small originals or
standard size copy of an original too
small to load in your unit.
Page & Document Size
Limitations
Your unit accepts original documents no
smaller than 6 inches wide by 8.5 inches
long, and no larger than 8.5 inches wide
original
by 59 inches long.
Do not attempt to load 2 or more
documents into the unit when the
documents are too thin or too thick.
These documents might fail in automatic
feeding. Feed one sheet at a time. Refer
to the chart below for acceptable
thickness.
Make a standard copy by using an office
copier to send
unacceptable thickness.
Setting Resolution and
m a k e a
Contrast of Documents
You can adjust the resolution and
c o n t r a s t t o
transmission of documents. The higher
the resolution, the longer the fax takes to
send, but the results will look better at the
receiving end.
You can choose from the following
resolution settings :
FINE : Documents
l
print or print from a dot-matrix printer
SUPER FINE : Documents containing
l
very detailed print, documents with
intricate drawing
The contrast control on your unit lets you
add half-tone
photographs or documents printed in
color.
The following
available :
LIGHT : Documents with light or faint
l
print, pencil
PHOTO : Photographs
l
the document of
documents containing many levels of
gray
send
a
high-quality
containing
small
shading for sending
contrast settings
are
or
other

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sf505

Table of Contents