Rice Lake 520 Installation Manual page 57

Command
DON#nn Set digital output nn on (active)
DON#0 Set all digital outputs on (active)
DOFF#nn Set digital output nn off (inactive)
DOFF#0 Set all digital outputs off (inactive)
For commands ending with "#nn", nn is the digital output (1-4) being set on or off.
Command
DIGIN1 Digital input function
DIGIN2
DIGIN3
Command
SOURCE1 Analog output source
OFFSET Zero offset
ERRACT Error action
MIN Minimum value tracked
MAX Maximum value tracked
ZERO1 Zero calibration
SPAN1 Span calibration
52 520 Installation Manual
Table 10-10. DIG OUT EDP Commands
Description
OFF, ZERO, NT/GRS, TARE, UNITS, PRINT, ACCUM, DSPTAR,
ENTER, BATRUN, BATSTRT, BATPAUS, KBDLOC, HOLD, CLRCN,
GROSS, NET, PRIM, SEC, TIME, DATE, CLRTAR, CLRACC
Table 10-11. DIG IN EDP Commands
Description
GROSS, NET
0%, 20%
FULLSC, HOLD, ZEROSC
0–9 999 999
0–9 999 999
0–99999
0–99999
Table 10-12. ALGOUT EDP Commands
Description
Values
Values