Chapter 7 Create A New Module - Allen-Bradley 1756-IF8I User Manual

Chapter 7 Configure ControlLogix Analog I/O Modules
Create a New Module
126
After you create a Logix Designer application project, complete the following
steps to create a module in the project.
1. Right-click I/O Configuration and choose New Module.
2. Select the module and click Create.
3. Click OK to accept the default major revision.
TIP You can verify the module's revision in RSLinx® Classic software.
The New Module dialog box appears.
Rockwell Automation Publication 1756-UM540E-EN-P - December 2017