Module Overview; Install A System; New Module Height Dimension - Allen-Bradley Compact 5000 Installation Instructions Manual

Module Overview

ANALOG INPUT
5069-IF8
DIN Rail Latch
Top Interlocking Piece
Module Status Indicator
I/O Status Indicator
Bottom Interlocking Piece
RTB Handle
RTB
MOD Power Bus
and SA Power Bus
Connectors
(isolated from each
other internally)
RTB Lower Tab
Lower hook for use
with cable tie.
Rockwell Automation Publication 5069-IN010B-EN-P - November 2017
COMPACT 5000 Analog 8-channel Current/Voltage Input Module

Install a System

Based on your application design, you must install a
CompactLogix 5380 controller or Compact 5000 I/O EtherNet/IP
adapter before you can install the module.
For more information on how to install these components, see
Additional Resources on page 14.
Required Components
To install the module, you need these components.
Component Description
One of the following RTB types.
• 5069-RTB18-SPRING RTB
Removable
• 5069-RTB18-SCREW RTB
terminal blocks
IMPORTANT: You must order RTBs separately. RTBs do not ship with
Compact 5000 I/O modules. We recommend that you order only the RTB
type that your system requires.
An end cap ships with the CompactLogix 5380 controllers and the
End cap
Compact 5000 I/O EtherNet/IP adapters.
The following tools are needed:
• Screwdriver
• Wire stripper
Tools
• Wires
For more information on available wire sizes and wire insulation stripping
length, see Specifications on page 13.
5