Nivel System DL60 Instruction Manual

Instructions manual
DL60, DL60L
DIGITAL ELECTRONIC LEVEL www.nivelsystem.pl
WARNING:
Please read the following instruction carefully before the tool used.
Technical data
Length: 600 mm
Measuring precision: ± 0.1 degree
Working temperature: -10°C ~ +50°C
Storage temperature: -30°C ~+70°C
Batteries: 9V CC
Automatic stop: after 5 minutes
Laser line
(DL60L)
Switch on/off laser line
(DL60L)
Use instructions
1. During the fi rst use of the digital level, put in the battery and select ON/OFF
Starting: press the ON/OFF button
Stopping: press the ON/OFF button
The level will automatically stop after 5mn without being used.
2. If the reading of the fi gures showing on the display is diffi cult, press the HOLD button in
order to «freeze» the display.
3. Reading a slope: start the level.
The slope is displayed. The standard measuring unit is in °.
This unit may be changed in % by pressing the 0 / % button.
Interpretation of the display: the arrows indicate the direction in which the level should
move to reach the 0° or 90° position.