Hitachi F700 Hardware Reference Manual page 38

Table 4 SVP (Windows 10 Enterprise) rear panel
Item
1
2
3
4
Note: The SVP running Windows 10 operating system does not provide an
option to disable Spanning Tree Protocol (STP). If your network has BPDU
enabled to prevent loops, connect the user LAN port on controllers 1 and 2 to
an Ethernet switch that is also connected to the LAN1 port on the SVP.
Note: After the Initial Startup Wizard is complete, the SVP can be used in non-
bridge mode. In this mode, the cables can be removed from SVP ports LAN3
and LAN4 and attached to switches. For more information, contact customer
support.
Hitachi Virtual Storage Platform F700 Hardware Reference Guide
Management (DKC CTL1) - LAN3 port
Management (DKC CTL2) - LAN4 port
Maintenance - LAN2 port
Management (User) - LAN1 port
Chapter 4: Service processor
SVP rear panel
Description
38