Leica iCON gps 60 User Manual page 61

Function: Edit
step-by-step
iCON gps 60, Software Tools

When using BasePilot, always check in the Position submenu that the
SmartAntenna has selected the correct base point! Using the wrong base
point can lead to an error of more than 20 m for a rover!
The Edit function can be used to enter a set of coordinates manually.
Step Description
1. Position the iCON gps 60 where the base point should be set up.
2.
Select Modify and confirm selection with
3.
Select Edit and confirm selection with
4. Enter the Point ID and a set of coordinates. Select and press Continue
key.
5. The instrument searches within the Base Point List for stored base points
in the vicinity.
6. Back in the Position screen, re-check the selected base point information.
Use the manually entered base point OR choose a base point from the
Base Point List if available.
key.
key.
61