Leica iCON gps 60 User Manual page 32

iCON gps 60, Using the iCON gps 60 SmartAntenna
Determining the
antenna height
with the GRT146
carrier
step-by-step
Step Description
1. Measure a height from the pillar benchmark to a surface on the carrier.
GS_036
2. Use the appropriate measurement from the diagram above. Determine the
height difference between the measured surface on the carrier and where
the MRP of the antenna sits on the carrier.
3. The vertical height reading = adding the values in step 1. and step 2.
32