Leica iCON gps 60 User Manual page 57

iCON gps 60, Software Tools
Step Description
2. Choose correct SmartAntenna mode:
• If iCON gps 60 is in base mode:
– BasePilot starts up automatically.
• If iCON gps 60 is in rover mode:
– Go to Settings\Tools\Base Setup and choose Find Nearest and
confirm selection with
Nearest step-by-step").
3.
While BasePilot is setting up: The position icon

On RTK Mode page, in the Position submenu the line BasePilot
shows: Setting up.
4.
After the BasePilot has been completed: The position icon
displayed. The radio/modem now starts transmitting corrections!

On RTK Mode page, in the Position submenu the line BasePilot
shows: Successful.
key (refer also to "Function: Find
is displayed.
is
57